Shipping to U.S.A. destinations ONLY
See TO REMOVE OLD COLLAR for practical suggestions.
These replacement collars are solid brass, with inside threading of four sizes.The kosmos, #2 , the #1 for #1 & #0 Queen Ann & Gem Artic (nice for small finger lamps), and the collars for Nutmeg & Acorn burners. The Nutmeg & Acorn(both for miniature oil lamps) have the same diameter & threading; the acorn collar is slightly shorter. The Acorn collar also serves as a female side-fill spout.
These collars are cemented in place over the glass neck using plaster, latex caulk, putty or (not recommended)epoxy.
Go to this page for the exact measurements of each collar.
A note of explanation: All #2 size burners will fit in all #2 collars; and likewise all #1 burners will fit into all #1 collars. Further, the threads of Kosmos burners and collars are metric and therefore not interchangeable with US collars #2, #1, or #00 which are not metric.
(See Miscellaneous Parts if you need collars for a side-fill font).
If you have questions or need advice, please EMAIL
Here is a helpful table of PARTS' DIMENSIONS~~~RETURN POLICY
Click on the thumbnail photos below for larger images and measurements.
|COLLARS||#2 Size & Description||EACH|
|#2 bright brass, lacquered, plain with two lines, heavy gauge||$3.95|
|#2 bright brass, unlacquered, plain, thin gauge,||$2.50|
|#2 plain, antiqued||Discontinued 4/1/17 by manufacturer|
| #2 brass INSERT - Click on the photo
to see a close-up of the collar and the type of lamp neck
that takes this collar style
|Discontinued 6/21/17 by manufacturer|
|#2 fluted band||$4.00|
|#2 Screw-on Collar, bright brass finish||$1.75|
|#2 Screw-on Collar, dark brass finish||$1.75|
| #2 NICKEL plated
solid brass plain collar
|COLLARS||#1(also fit #0 burners) Size & Description||EACH|
|#1 plain, antiqued||$3.50|
|#1 press-on Sorry, no longer being made|
|COLLARS||#00 Size & Description||EACH|
|COLLARS||#1 Size & Description||buy this||Kosmos