glass,oil,kerosene,lamp,font,fount,wall,bracket,hangingShipping to U.S.A. destinations ONLY

These BRASS shade ring holders are much more costly than tripods, but vastly more secure. The arms are fastened to the outer rolled brass shade ring with rivets and therefore cannot flex, as tripod arms do. The entire bottom of the glass shade slips into the edged brass ring. This means that the shade, if bumped, will not slide off the lamp. With a tripod, the shade totters on the ends of the three arms. And finally, the shade ring holder elevates the bottom of the shade so that one need not remove the shade to light the lamp - plus the entire assembly really dresses up the lamp.


The seven inch size is standard for smaller oil lamps; those with #1 size burners. If your lamp already has a burner and fits at chimney with a 2.5" base, this is the recommended shade ring holder. Price is $30.00 + shipping by Priority Mail ($7.85). Packed weight is just less than ten ounces.

SEVEN INCH FITTER SHADE RING HOLDER FOR #1 SIZE BURNER



This shade ring accepts any glass shade with a 9-7/8" base diameter and fits on a NEW SOLID BRASS #2 burner, such as a B&P burner.The inside diameter of the center ring is 2-9/16+", and such a burner takes a chimney with a 3" base. If you are not certain if your burner is solid brass, test it with a refrigerator magnet or compass (brass is not magnetic. Price is $40.00 + shipping by Priority Mail ($11.55) nationwide. The packed weight is a little more than one pound.
TEN-INCH FITTER SHADE RING HOLDER FOR NEW BRASS #2 SIZE BURNER


This shade ring accepts any glass shade with a 9-7/8" base diameter and fits on an OLD SOLID BRASS #2 burner, such as an Eagle, Miller, P&A, etc. burner. It will also fit any brass plated steel burner, such as Lamp Light Farms (these burners are magnetic). The inside diameter of the center ring is 2-11/16", and such a burner takes a chimney with a 3" base. Price is $40.00 + shipping by Priority Mail ($11.55) nationwide. The packed weight is a little more than one pound.

TEN-INCH FITTER SHADE RING HOLDER FOR OLD BRASS OR BRASS PLATED STEEL #2 SIZE BURNER


(Not pictured:)This shade ring accepts any glass shade with a 9-7/8" base diameter and fits on a CENTRAL DRAFT BURNER, such as a Rayo, Royal, Miller, B&H, etc. (any burner whose central draft tube is 1.5" across). The inside diameter of the center ring is 2-13/16", and such a burner takes a chimney with a 2.5" base. Price is $40.00 + shipping by Priority Mail ($11.55) nationwide. The packed weight is just less than one pound.
TEN-INCH FITTER SHADE RING HOLDER FOR CENTRAL DRAFT BURNER

Return to the HOLDERS & TRIPODS page.

Return to the HOME page.