All profits donated to charity.
Shipping ONLY to U.S.A. destinations ONLY
~ BURNERS ~ COLLARS ~ CHIMNEYS ~ WICKS ~ SHADE HOLDERS ~ SHADES ~ HARDWARE ~ ANTIQUE Victorian Oil Lamps ~ WALL Bracket parts ~ ABOUT ~
MISCELLANEOUS OIL/KEROSENE LAMP PARTS - These are the parts that I keep in stock. The caps and spout are for side-fill fonts. A reducer allows one to use a #1 size burner on a lamp whose collar is #2 size. The same principle applies to the #3-to-#2 All are solid brass. An expander allows one to place a #2-size burner on a lamp having a #1-size collar. I also stock wicks for Nutmeg, Acorn, Gem, #1, #2 and central draft burners (such as B&H, Rayo, Royal, GWTW lamps), and hinges for bracket oil lamps.
Click here for WALL BRACKET lamp parts
Click on the small photographs to enlarge
| *MISCELLANEOUS* | EACH | |
 Flame Spreader
for Central Draft Burner(Jan. 22, 2015)Sorry, the manufacturer has discontinued this item. I am trying to find an alternate source. |
$16.00 | |
 Solid stamped brass SMOKE BELL, 2-1/4 in. tall, 3-3/8 in. diameter. | $24.08 | |
 Female cap(solid brass)- 1-1/16 Inch i.d. with interior cork disk |
$2.50 | |
 Male cap(solid brass)- 11/16" o.d. thread-Out of stock, no longer being made |
$2.65 | |
 B&H,Bradley & Hubbard,Miller and Rayo filler caps(solid brass) |
$6.50 | click on the thumbnail |
 Male filler spout(solid brass)- 11/16" i.d. thread |
$2.67 | |
 Female spout(solid brass) 1-inch o.d.Out of stock,
no longer being made |
$3.50 | |
Collar reducer(solid brass) #3 to #2- allows one to thread a #2 size burner into a #3 size collar -Out of stock, no longer being made |
$8.70 | |
|
Collar reducer(solid brass) #2 to #1 - allows one to thread a #1 size burner into a #2 size collar. Out of stock, no longer being made |
$5.94 | |
|
Collar reducer(solid brass) #1to #00 - allows one to thread a Nutmeg or Acorn (#00) size burner into a #1 size collar -Out of stock, no longer being made |
$4.84 | |
Collar expander (solid brass) #1 to #2- allows one to thread a #2 size burner into a #1 size collar |
$4.65 | |
 Bracket Lamp Hinge plate,iron, pointed ends, includes black screws-for bracket arms without a reflector loop |
$7.61 | |
| Bracket Lamp Hinge plate,iron, rectangular shape,includes black screws - for bracket arms with a reflector loop |
$8.10 | |
 Top Ring for ball shade(solid brass, inside diam.=3", outside=3-7/8")
| $8.84 |